IMPROVE CUSTOMER’S PRODUCTS SAFETY&QUALITY IS OUR ALWAYS PURSUIT
You are here: Home » Products » Metal Separator » Metal Separator
Share to:

Metal Separator

Rubber and plastics industry Recycling industry Chemical industry Bulk material detection and automatic separation in other industries
Widely used in injection molding, plastic granulation, plastic extrusion and calendering, plastic recycling and other fields.
two. working principle:
The raw material passes through the detector 2 in a falling manner, and when the metal is detected, the separation baffle 5 is immediately activated to separate the raw material containing the metal particles 4.
The mouth 6 is excluded, and the qualified product falls straight into the qualified material from the 7 qualified material discharge pipe.

Quantity:
  • SAMD-600CM

图片6图片7

1 feeding tube 2 detecting coil 3 controller 4 metal impurities 5 rejecting board 6 waste port 7 qualified material feeding tube

SAMD-600CM metal seperator

Product introduction:

 German technology, with high sensitivity and high reliability; used to separate magnetic and non-magnetic metals from free-fall bulk materials to ensure product quality; integrated metal foreign body quick reject system, suitable for detecting bulk materials.

1. Application industry

Rubber and plastics industry Recycling industry Chemical industry Bulk material detection and automatic separation in other industries

Widely used in injection molding, plastic granulation, plastic extrusion and calendering, plastic recycling and other fields.

two. working principle:

The raw material passes through the detector 2 in a falling manner, and when the metal is detected, the separation baffle 5 is immediately activated to separate the raw material containing the metal particles 4.

The mouth 6 is excluded, and the qualified product falls straight into the qualified material from the 7 qualified material discharge pipe.

Product advantages:

1. German technology, with high precision, high stability, intelligent detection, maintenance-free;

2. The outer casing and the metal material that directly contacts the product part are made of stainless steel 304;

3. Special structural design can effectively avoid interference from external factors such as vibration, noise and product effects;

4. A variety of calibers are available, and the model meets all practical applications;

5. It can avoid product accumulation, blockage and cause mold;

6. Counter, record the number of times the metal is removed, and know the pass rate of the product batch in more detail.

four. Performance characteristics:

1. The detection detecting coil and the separating device are integrated, the controller and the host are inseparable, and the installation and use are simple;

2. Quick rejection by rejecting devices minimizes material loss; does not interfere with normal production processes;

3. Low installation height for easy integration; optional quick connector and airtight flange for quick installation and removal;

4. Test material properties: dry, good fluidity, no long fibers, no conductivity;

5. Detecting material temperature: less than 80 ° C, temperature exceeding this range, optional special high temperature option;

6. The controller can be installed at 10m in the detection position;

7. Protection level: IP65

8. It is mainly used for the detection of loose granular materials (particles <8mm) fed by gravity self-flow, which can be used in plastics industry, food industry, chemical industry.

V. Harm of metal impurities:

1. Clog the nozzle and melt filter.

2. Block the hot runner and the mold injection port.

3. Damage to the screw, barrel, and mold.

4. Lead to downtime and production accidents.

5. Inclusion in the middle of the finished product, resulting in unqualified products.

Benefits of using a metal separator:

1. Protect injection molding, extrusion and other equipment from metal impurities in plastic pellets and protect production equipment.

2. Prevent metal impurities from causing damage to molds, hot nozzles and valves.

3. Reduce equipment failure and production downtime caused by blockage of the solution filter and nozzle.

4. Reduced production costs while increasing production efficiency.

5. Improve the quality and quality of plastic products, reduce waste, and make full use of raw materials.

6, to prevent customers from being damaged by metal sharps, thus preventing the company's reputation from being damaged and avoiding damage claims.

 图片8

Item

Feed pipe diameter(mm)

Detection sensitivity

Maximum throughput L/h

Installation height mm

FeΦ

SUSΦ

SAMD-600-30 

25

0.2mm

0.5mm

250

370

SAMD-600-50

50

0.5mm

1.0mm

2000

SAMD-600-70

70

0.7mm

1.2mm

5000

SAMD-600-100

88

1.0mm

1.5mm

12000

473

SAMD-600-120

108

1.2mm

2.0mm

16000

SAMD-600-150

138

2.0mm

2.5mm

25000

600

SAMD-600-200

188

2.5mm

3.0mm

44000

922

SAMD-600-250

238

3.0mm

3.5mm

69000

948

 

 


Product Inquiry
GET IN TOUCH
  0086-769-2361 6518
  info@shananchina.com
  Sang Yuan , Dong Cheng area , Dong Guan,Guang Guangdong China.
Copyright  2010 Guangdong Shanan Technology co.,ltd.   |  Designed by WUCHE.COM